Change Details

# Arcanist Arcanist is a CLI tool that helps you submit your code changes for code review. You can use it to * create, submit and update diffs (`arc diff`); * land the changes after they've been reviewed (`arc land` - this equivalent to a "Merge"); * run unit tests and check code coverage (`arc lint`, `arc unit`) ## Instalacja See this link for an installation guide: https://hub.sealcode.org/w/sealhub_workflow/linting/ ## Konfiguracja Wykonaj polecenie ``` # arc install-certificate https://hub.sealcode.org/ ``` i podążaj za instrukcjami. Jest to jednorazowy krok mający na celu uwierzytelnienie Arcanista na Twojej maszynie w danym repozytorium lokalnym. ## Wybór domyślnego edytora Arcanist korzysta z domyślnego edytora, aby umożliwić konfigurację diffów (wliczając w to tytuły diffów i listę recenzentów). Aby wybrać domyślny edytor, ustaw odpowiednio zmienną środowiskową `$EDITOR` (prawdopodobnie możesz to zrobić w Twoim pliku `~/.bashrc`, w przypadku systemu OSX w pliku `~/.bash_profile`). ## Korzystanie z Arcanista Arcanist jest wymagany do pracy w Review Workflow. W [dokumencie opisującym workflow](https://hub.sealcode.org/w/sealhub_workflow/audyt-i-review/review-workflow/) można przeczytać więcej o tym, jak korzystać z Arcanista. ## Kilka review naraz Może zdarzyć się, że wyślesz zmiany na review i pozostaje Ci czekać, aż ktoś je zrecenzuje. W międzyczasie możesz oczywiście pracować nad innym diffem! Załóż nowego brancha, który ma zwój korzeń w `master`ze, wykonaj kilka commitów i ponownie możesz założyć nowy review request za pomocą polecenia `arc diff`. ----- ## Rozwiązywanie problemów ### Error: `"Arc was unable to automagically make a name for this patch"` Jeżeli po kilkukrotnym odpaleniu `arc patch` na tego samego diff arc krzyczy: ``` name="arc patch" Branch name arcpatch-D300 already exists; trying a new name. Branch name arcpatch-D300_1 already exists; trying a new name. Branch name arcpatch-D300_2 already exists; trying a new name. Branch name arcpatch-D300_3 already exists; trying a new name. Exception Arc was unable to automagically make a name for this patch. Please clean up your working copy and try again. (Run with `--trace` for a full exception trace.) ``` Oznacza to, że wyczerpały się nazwy branchy, pod którymi trzymane są poprzednie patche tego samego diffa. ``` name="git branch" * alpha arcpatch-D187 arcpatch-D188 arcpatch-D196 arcpatch-D213_1 arcpatch-D213_2 arcpatch-D217 arcpatch-D300_1 arcpatch-D300_2 arcpatch-D300_3 ... ``` Jeżeli nie potrzebujesz już żadnych poprzednich lokalnych branchy w postaci `arcpatch-D...`, możesz je usunąć poleceniem: ``` # git branch | cut -c3- | grep arcpatch- | xargs -n1 git branch -D ``` Więcej o rozwiązaniu tego problemu możesz przeczytać tutaj: https://secure.phabricator.com/T3277#33729 ### Exception: Source file ".pinterest-linters/__phutil_library_init__.php" failed to load. Rozwiązania: 1. Sklonuj repozytorium dodając flagę `--recursive` do polecenia `git clone`, LUB 2. W sklonowanym repozytorium wykonaj polecenie `git submodule update --init`

# Arcanist Arcanist is a CLI tool that helps you submit your code changes for code review. You can use it to * create, submit and update diffs (`arc diff`); * land the changes after they've been reviewed (`arc land` - this equivalent to a "Merge"); * run unit tests and check code coverage (`arc lint`, `arc unit`) == Installing Arcanist and the linters == Make sure you have `php` installed in your system. ```lang=bash mkdir -p ~/bin cd ~/bin git clone https://we.phorge.it/source/arcanist.git arcanist git clone https://hub.sealcode.org/diffusion/124/arcanist-linters.git git clone https://github.com/sealcode/arc-unit-mocha.git ln -s arcanist/bin/arc arc # Add ~/bin to your `PATH` variable, if it's not there already: echo "export PATH=\$PATH:$HOME/bin" >> ~/.bashrc echo "export PATH=\$PATH:$HOME/bin" >> ~/.zshrc # restart the terminal and check if this command: which arc # returns: /home/<your_username>/bin/arc # If it returns something else, like /usr/bin/arc, then uninstall the arcanist package provided by your package manager ``` ## Configuration Run: ``` # arc install-certificate https://hub.sealcode.org/ ``` and follow the instruction. It's a one-time command that will save authorization info for the future. ## Changing the default editor Arcanist uses your shell's default text editor for diff messages. To pick your default editor, set the `EDITOR` env variable to an editor of your choice (you can do this in `~/.bashrc`, `~/.bash_profile`, or similar) ## Using Arcanista Arcanist is needed for smooth operation of the Review Workflow. Read more about how to use Arcanist in [this guide]https://hub.sealcode.org/w/sealhub_workflow/audyt-i-review/review-workflow/). ## Multiple concurrent reviews on the same repo You can work on multiple tasks in the same local repository. While you're waiting for your changes on task to be reviewed, create a new branch starting from `master`, make some commits, and use `arc diff` again to submit a new revision for review. ----- ## Troubleshooting ### Error: `"Arc was unable to automagically make a name for this patch"` If after running `arc patch` for the same diff multiple times in the same repo you see a message like this: ``` name="arc patch" Branch name arcpatch-D300 already exists; trying a new name. Branch name arcpatch-D300_1 already exists; trying a new name. Branch name arcpatch-D300_2 already exists; trying a new name. Branch name arcpatch-D300_3 already exists; trying a new name. Exception Arc was unable to automagically make a name for this patch. Please clean up your working copy and try again. (Run with `--trace` for a full exception trace.) ``` It means that `arc` ran out of branch names to keep your changes in. ``` name="git branch" * alpha arcpatch-D187 arcpatch-D188 arcpatch-D196 arcpatch-D213_1 arcpatch-D213_2 arcpatch-D217 arcpatch-D300_1 arcpatch-D300_2 arcpatch-D300_3 ... ``` If you don't need those branches anymore, just delete them: ``` # git branch | cut -c3- | grep arcpatch- | xargs -n1 git branch -D ``` See https://secure.phabricator.com/T3277#33729 for more details ### Exception: Source file ".pinterest-linters/__phutil_library_init__.php" failed to load. Solutions 1. Add `--recursive` flag to the `git clone` used for cloning pinterest linters repo, or 2. In arcanist linters repo, run `git submodule update --init`

# Arcanist Arcanist is a CLI tool that helps you submit your code changes for code review. You can use it to * create, submit and update diffs (`arc diff`); * land the changes after they've been reviewed (`arc land` - this equivalent to a "Merge"); * run unit tests and check code coverage (`arc lint`, `arc unit`) == Installing Arcanist and the linters == Make sure you have `php` installed in your system. ```lang=bash mkdir -p ~/bin cd ~/bin git clone https://we.phorge.it/source/arcanist.git arcanist git clone https://hub.sealcode.org/diffusion/124/arcanist-linters.git git clone https://github.com/sealcode/arc-unit-mocha.git ln -s arcanist/bin/arc arc # Add ~/bin to your `PATH` variable, if it's not there already: echo "export PATH=\$PATH:$HOME/bin" >> ~/.bashrc echo "export PATH=\$PATH:$HOME/bin" >> ~/.zshrc # restart the terminal and check if this command: ## Instalacjawhich arc See this link for an installation guide: https://hub.sealcode.org/w/sealhub_workflow/linting/# returns: /home/<your_username>/bin/arc # If it returns something else, like /usr/bin/arc, then uninstall the arcanist package provided by your package manager ``` ## K## Configuracjation Wykonaj polecenieRun: ``` # arc install-certificate https://hub.sealcode.org/ ``` i podążaj zaand follow the instrukcjamiction. Jest to jednorazowy krok mający na celu uwierzytelnienie Arcanista na Twojej maszynie w danym repozytorium lokalnymIt's a one-time command that will save authorization info for the future. ## Wybór domyślnego edytora## Changing the default editor Arcanist korzysta z domyślnego edytora, aby umożliwić konfigurację diffów (wliczając w to tytułyuses your shell's default text editor for diffów i listę recenzentów) messages. Aby wybrać domyślny edytorTo pick your default editor, ustaw odpowiednio zmienną środowiskową `$EDITOR` (prawdopodobnie możesz to zrobić w Twoim plikuset the `EDITOR` env variable to an editor of your choice (you can do this in `~/.bashrc`, w przypadku systemu OSX w pliku `~/.bash_profile`). ## Korzystanie z Arcanista Arcanist jest wymagany do pracy w Review Workflow.`~/.bash_profile`, W [dokumencie opisującym workflow](https://hub.sealcode.org/w/sealhub_workflow/audyt-i-review/review-workflow/) można przeczytać więcej o tym, jak korzystać z Arcanista.or similar) ## Using Arcanista ## Kilka review narazArcanist is needed for smooth operation of the Review Workflow. Read more about how to use Arcanist in [this guide]https://hub.sealcode.org/w/sealhub_workflow/audyt-i-review/review-workflow/). ## Multiple concurrent reviews on the same repo Może zdarzyć się, że wyślesz zmiany na review i pozostaje Ci czekać, aż ktoś je zrecenzujeYou can work on multiple tasks in the same local repository. W międzyczasie możesz oczywiście pracować nad innym diffem!While you're waiting for your changes on task to be reviewed, Załóż nowegocreate a new brancha starting from `master`, który ma zwój korzeń w `master`zemake some commits, wykonaj kilka commitów i ponownie możesz założyć nowyand use `arc diff` again to submit a new review request za pomocą polecenia `arc diff`sion for review. ----- ## Rozwiązywanie problemów## Troubleshooting ### Error: `"Arc was unable to automagically make a name for this patch"` Jeżeli po kilkukrotnym odpaleniu `arc patch` na tegoIf after running `arc patch` for the same diff multiple times in the samego diff arc krzyczy:e repo you see a message like this: ``` name="arc patch" Branch name arcpatch-D300 already exists; trying a new name. Branch name arcpatch-D300_1 already exists; trying a new name. Branch name arcpatch-D300_2 already exists; trying a new name. Branch name arcpatch-D300_3 already exists; trying a new name. Exception Arc was unable to automagically make a name for this patch. Please clean up your working copy and try again. (Run with `--trace` for a full exception trace.) ``` Oznacza to, że wyczerpały się nazwy branchy,It means that `arc` ran out of branch names to keep your changes in. pod którymi trzymane są poprzednie patche tego samego diffa. ``` name="git branch" * alpha arcpatch-D187 arcpatch-D188 arcpatch-D196 arcpatch-D213_1 arcpatch-D213_2 arcpatch-D217 arcpatch-D300_1 arcpatch-D300_2 arcpatch-D300_3 ... ``` Jeżeli nie potrzebujesz już żadnych poprzednich lokalnychIf you don't need those branchy w postaci `arcpatch-D...`es anymore, możesz je usunąć poleceniem:just delete them: ``` # git branch | cut -c3- | grep arcpatch- | xargs -n1 git branch -D ``` Więcej o rozwiązaniu tego problemu możesz przeczytać tutaj:See https://secure.phabricator.com/T3277#33729 for more details ### Exception: Source file ".pinterest-linters/__phutil_library_init__.php" failed to load. Rozwiązania:Solutions 1. Sklonuj repozytorium dodając flagę `--recursive` do polecenia `git clone`Add `--recursive` flag to the `git clone` used for cloning pinterest linters repo, LUBor 2. W sklonowanym repozytorium wykonaj polecenieIn arcanist linters repo, run `git submodule update --init`